DIY Your Home

Trust Options of Cleaning Stucco

Trust Options of Cleaning Stucco

Jun 21, 2019

Although stucco requires little maintenance and cleaning, should be cleaned at regular intervals, to maintain a stucco wall or ceiling in ideal condition, it is important to do maintenance at least once a year or even more often.

One reason why stucco needs to be cleaned annually is because the mortar is usually made with the addition of porous materials such as plaster, water and lime, which impregnate dirt, mildew and mildew quite easily.

cleaning stucco

How to clean stucco

The standard stucco is relatively easy to clean, simply sprinkle a small amount of warm water on the soiled area, and rub with a soft cloth so that the affected area does not need a more specialized cleaning. Washing must be done soon to appear dirt, in some cases to clean the stucco can use a neutral soap with the help of a soft sponge, dry the surface immediately.

Household cleaners can be not only toxic, but also costly, because of what people are trying to find them an adequate replacement. Vinegar is an excellent all-purpose cleaner that is ideal for cleaning walls. A simple cleaning solution can be made from water and vinegar is best for cleaning stucco with vinegar. And although this is a natural solution, its action should be checked first on a small section of the wall.

A solid foundation is the key to success

Before finishing, check the reliability of the old coating. In some cases, you do not have to completely remove the old layer, you only need to repair it. How to clean stucco exterior walls, if the old cracked? Why it is impossible to impose a new one right away? The basis of the finish must be durable, otherwise the new coating will quickly fall off in pieces along with the former.


Six steps to the finish

Removing plaster from the walls is carried out until such time as from the old finish will not remain a layer that is firmly linked to the masonry. All loose parts are removed. The work is laborious and laborious, so it is recommended that you be patient.

Below is a step-by-step instruction, by adhering to which a beginner can clean the walls of the old finish, and the video in the article will help to deal with the work in more detail:

Before removing the old plaster it is necessary to clean the surface from the old topcoat. You can remove the paint with a wide trowel, pre-wetting the old composition with water. As water is quickly absorbed and dries to the surface, it is constantly splashing from the spray bottle. Readers ask how to remove stains from stucco walls from the wall without dust, dirt. Use more water, so there will be less dust indoors during work.

If there are no gaps, but the layer of the old finish is too thick, then it is also better to remove it.

A thick layer of the old mortar will disappear due to moisture after you apply a new one.

Fill the gaps with a primer in two layers, let them dry. Inside we lay a new solution, level by the wall level. The remaining surface of the masonry primed and covered with a thin layer of plaster.

After drying, the wall is leveled from minor defects with the help of skins. The skin is taken first with large grains, gradually moving to the smallest – polishing.